Scene problem

Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !

Moderators: simonB, florent, RichterMC, dylan

Post Reply
RMWessels

Scene problem

Post by RMWessels » Tue Dec 02, 2008 9:18 am

Hello everybody,

I need some help on something I couldn't find out in the manual..

I've been working on a show for a while now, and I wanted to make a scene with steps, pretty easy, right? But what I want is the following;

-Activate the scene with a designated hotkey (e.g. A)
-Go to the next STEP of the scene (Or switch/button, I don't really care) by pressing a key, (pressing A key again, for example)

The "normal" easy step only changes steps after X seconds etc, and this isn't what I need.

Could this be done in SunLite?

Regards,

RMWessels

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Re: Scene problem

Post by bruno.falip » Tue Dec 02, 2008 9:40 am

Unfortunately there is no way to do that, the only solution would be to create a cycle with switches or scenes (1 step = 1 button).

RMWessels

Re: Scene problem

Post by RMWessels » Tue Dec 02, 2008 9:54 am

So you mean for 3 steps I would need 3 buttons?

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Re: Scene problem

Post by bruno.falip » Tue Dec 02, 2008 12:45 pm

Yes

RMWessels

Re: Scene problem

Post by RMWessels » Tue Dec 02, 2008 8:43 pm

Ok thanks for the replies, Odd its not implented though.

Post Reply