beams are reversed in EZ View..

Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !

Moderators: simonB, florent, RichterMC, dylan

Post Reply
luceses
Junior Forumor
Posts: 31
Joined: Tue Nov 20, 2007 8:00 am

beams are reversed in EZ View..

Post by luceses » Mon Sep 01, 2008 8:40 pm

Hello. I have been setting up a show in the EZ View software and I have noticed that the pan is reversed in the EZ View. Is this a possible bug or maybe some initial setting I may have overlooked? I am using Trackspots V2 and Technobeams 14 ch. I could rectify this by setting Invert Pan on ALL my fixtures......but I would rather not. :wink:


Thanks,
luceses

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Post by bruno.falip » Tue Sep 02, 2008 7:07 am

I have just opened the software manual, typed "invert" in the "Search for" section and found what you need.

luceses
Junior Forumor
Posts: 31
Joined: Tue Nov 20, 2007 8:00 am

Post by luceses » Wed Sep 03, 2008 6:58 pm

Thank you for the reply. However,your advice did not help me resolve my problem.

However,this information did help me resolve the issue. For anyone else who cares.

http://www.dmxsoft.com/manuals/index.php?affman=1

luceses
Junior Forumor
Posts: 31
Joined: Tue Nov 20, 2007 8:00 am

Post by luceses » Wed Sep 03, 2008 7:01 pm

BtW, select Construction Mode>Objects Settings.


luceses

Post Reply