Problem with patch of fixtures

Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !

Moderators: simonB, florent, RichterMC, dylan

Post Reply
DJ_Daniel
Posts: 3
Joined: Sat May 19, 2007 2:42 pm

Problem with patch of fixtures

Post by DJ_Daniel » Sat Oct 10, 2009 11:08 am

Have a problem with patching new fixtures. I had working show with different fixtures (12 scanners, 14 moving heads, etc), needed to install 4 new fixtures (Coemar for TAS TX 360, 10 channels each). I hadn't gap for 40 channels in a row, so I made new page for these fixtures from addr 272 (had a gap 272-298) and manually changed patch for fixtures 3-4 to addr 473-493 (in settings of page). And now a cross-link in dmx channels (I have another fixtures from addr 300) is shown, from fixture page everything work OK, but in masterpage no new fixtures are shown (on channels 272-292 and 473-493), so I cannot edit switches with these fixtures. Any suggestion? I don't want to re-adress all fixtures to make 40-channels-in-row-gap for these new 4 fixtures. :-) Workiong on Sunlite Suite 2006 30 August 2007 with old blue interface :-)

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Problem with patch of fixtures

Post by simonB » Mon Oct 12, 2009 2:10 pm

Send me your show and I'll take a look

simon@traxsound.co.uk
Simon
--
Sales/Support

Post Reply