DMX Input to Control Sunlite

Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !

Moderators: simonB, florent, RichterMC, dylan

Post Reply
bjkered
Junior Forumor
Posts: 40
Joined: Thu Jul 21, 2005 2:42 pm

DMX Input to Control Sunlite

Post by bjkered » Tue Sep 11, 2007 10:09 pm

On the SL2048EC can you control the software using a DMX board or can you only control the software using a MIDI interface.

I want to use a very simple DMX board to control the software . I want to plug in the board to the 3 pin DMX input and assign faders to programed scenes and or Flash buttons on the board to select scenes or steps
Derek Barton

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Post by bruno.falip » Wed Sep 12, 2007 1:42 pm

DMX is possible

bjkered
Junior Forumor
Posts: 40
Joined: Thu Jul 21, 2005 2:42 pm

Post by bjkered » Wed Sep 12, 2007 2:00 pm

Thank you

If I look in the software where do you set the DMX to say a scene or step
Derek Barton

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Post by bruno.falip » Thu Sep 13, 2007 7:25 am

??

bjkered
Junior Forumor
Posts: 40
Joined: Thu Jul 21, 2005 2:42 pm

Post by bjkered » Thu Sep 13, 2007 7:28 am

I have the software loaded and was wondering where do I go to set up a DMX input to an associatted Scene

for example if I have a scene of Par lamps on and want to assign a dmx input eg channel 5 on a DMX board to control the scene, where do I do this I slide fader 5 on the DMX board up and the scene is activated
Derek Barton

bruno.falip
SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Post by bruno.falip » Thu Sep 13, 2007 7:33 am

From the button settings window.

Post Reply