Nicolaudie Architectural Forum

My church has just built a new sanctuary, the old one is being converted into an airport themed building for children k-5 grade.

i have 6 airport runway lights that i have modified to hold Chauvet color splash juniors (led par cans) 3 are on the left side of the room, and 3 are on the right side of the room

My problem is is that we just added 4 more color splash juniors that are at the bottom of a lighting truss pointing up toward the ceiling, the trusses are around 6 feet tall and are standing verticle... when i chase the runway lights the 6 original lights work fine, but the new lights when chased, want to go faster than the 6 original.... below i have the chase sequence


4 5 5 4


3 3

2 2

1 1



the chase starts with one and ends with 5, it looks like runway lights, but the position 5 and position 4 lights go slower


between the runway light dmx adresses and the 4 truss light adresses there are 5 other channels on the same page that are not in use for the runway light chase


if lights 1 2 and 3 chase at equal speeds, lights 4 and 5 chase around half a second after the fact



please help, thx

It's difficult to answer on the forum. You should call our office in Florida and maybe send your backup to them so they can check your show.