INPUT port connected to Vdd or GND?

[84germain]

Hello. I'd like to have a confirmation.

In the hardware manual, [url]http://www.dmxsoft.com/manuals/?oem=SUNLITE&na=gY7[/url]
it's written:
"INPUT PORTS
To use the input ports, you must create a connection between the VDD pin and any port."

And in the easy stand alone manual about SUIDI6:
[url]http://www.dmxsoft.com/manuals/index.php?langman=en[/url]
"To use the input ports, you must create a connection between the Ground pin and the ports (see the picture below). "

ANd in the software ESA:
[url]http://www.dmxsoft.com/manuals/index.php?langman=en[/url]
The picture show connection to GND.

So I'd like which one is the true one, because usually GND is not Vdd.

Thanks you for your reply.

François

[bruno.falip]

It is VDD for the SLESA-U6, ground for the other products. I have just checked the online user manual and found the mistake. It works as described on the picture.

See the SIUDI tutorials for more information: http://www.nicolaudie.com/tutorials/siudi/