Need REAL slow scan movement...

teggers · Post by **teggers** » Thu Apr 14, 2005 8:38 pm

I will do a search later tonight on this question, but I need to slow down the fade time REAL slow so the lights will scan the room with logos. I was using the automated settings but was unable to slow them down as much as I needed. I had to actually use a manual controler (and not use the software) and program that with a fade slider to get by.

How do I edit the "fade" of the pre-generated scenes/chases so the lights scan REAL slow?

Thanks, Tim Eggers

Guest · Post by **Guest** » Fri Apr 15, 2005 9:33 am

You must:

1- Edit the scene
2- Right-click on the shape area
3- Select "Shape properties..." from the menu
4- Go to the "Time" tab and select a longer time for the steps

teggers · Post by **teggers** » Fri Apr 15, 2005 7:25 pm

Thanks so much.....works like a charm....

I knew it was easy but with a show going on and all....forgot where that setting was.

BTW, can I alter the settings of all the time lines by multiple selection of the fixtures - or do I have to edit all of them - 1 at a time?