Nicolaudie Architectural Forum

Yes, I know the procedure, and it works well with a normal keyboard ! I cannot use the ctrl button, because i havn't a ctrl button. But I have entered in setting "trigger key" and you can see the key in the button displayed, but when I push the key it doesn't react. So it seems a hardware ...

I don't see the problem, you can make a "new" preset, if you wan't a fader choose "use the dimmer fader"

Hello, I use the robe 160 xt and use the automaticly programmed switches. What happens now: I start a movement with a circle movement (@) I choose a color (red) +gobo, when I recall another movement (@), the beam jumps to white and open gobo again. I know you can put the channel OFF, but why is this...

Hello, I have here an nice "old" devlin flat keyboard with 175 keys that can be labeled. I can add the keystroke in the settings of the button and they are displayed in the button. But when I push the button of the keyboard the switch /scene is not activated. What can be wrong ? A normal k...

Is there any sunlite interface connected in your network ?
I think this is necessary.
(to run sunlite in EC or FC (not demo mode))
It is possible that I am wrong...

Hello, It would be very usefull that we can start more then 1 scene at a time in stand alone mode. That could be very usefull when you use leds in a multi zone enviroment. (leds above the bar, leds at the wall,....) I know you can buy more interfaces but then you miss the possibility to program glob...

And wat means 4+2 on your brochure ?
up /down ?

Is this normal that we have only 4 ports available in slesa- U6
I thought we could use 6 ports in this version ?

That is a very good idea, so we can use a cheap dmx switchpanel (like this: http://www.beglec.com/products.php?product=4608&lang=NL) to control the slesa interface.

Hello,

I think the most people use the "@scenes" in compression mode !
Now you must change theses every time in the page settings from list to compression.
Especially new users (demo users) would find these buttons easy-er on the screen !

Or am I wrong, other sunlite users ?

Isn't the dmx input with a manual desk not a solution ?
They also showed something on frankfurt with an midi fader desk that could be very usefull (version 2006 ?)

You can save every custom made movement in the shape properties and re -use it with all your fixtures.

When you select: page settings- display settings- live toolbar page
you will get an master speed and master dimmer for this page !
This can be controlled with an fader of an external dmx panel if you have a dmx input module, or you can control it manualy in the software

Hope this helps

And what is then the meaning of half-color effect type: you don't get an half color in the 3 d visualisation and you don't get a halfcolor icon ?

Another good idea maybe for the editor: a preview of the 3d response of your machine: so you can see if all your parameters are correct set !

Is there somewhere a history of the different versions.
Sometimes a new version comes out, and it would be usefull if we know what is changed in that version!