Search found 22 matches

by Threadrag
Fri Feb 26, 2016 4:58 pm
Forum: Sunlite Suite 2
Topic: Favourites - save windows postioning data
Replies: 0
Views: 2785

Favourites - save windows postioning data

Hi,

can I save windows postitioning data without the Favourites window itself?

Is it possible to save postion of zones? In particular the position of cascaded zones? Here On/Off:
pic.jpg
pic.jpg (54.27 KiB) Viewed 2785 times
Best Regards
Simon
by Threadrag
Tue Feb 23, 2016 6:26 pm
Forum: Sunlite Suite 2
Topic: Stairville MH-100 Beam Pan/Tilt
Replies: 1
Views: 2059

Re: Stairville MH-100 Beam Pan/Tilt

Hallo, du redest von EasyView? Du kannst die Geräte dort verschieben und drehen, bis sie der tatsächlichen Position entsprechen. Zusätzlich lässt sich Pan und Tilt Invertieren. Sollten die Bewegungen immer noch nicht übereinstimmen, öffne den ScanLibrary Editor, ob Pan/Titl-Winkel und Geschwindigkei...
by Threadrag
Tue Feb 23, 2016 6:17 pm
Forum: Sunlite Suite 2
Topic: Fade Out to blackout
Replies: 1
Views: 2260

Re: Fade Out to blackout

Hi,

please edit the INIT scene and change all channels from "off" (red power icon) to "dimmer" (dimmer icon) with value 0.
by Threadrag
Tue Feb 23, 2016 6:11 pm
Forum: Sunlite Suite 2
Topic: Creating a Startup Scene
Replies: 6
Views: 4408

Re: Creating a Startup Scene

Hi,

you can do that with the INIT scene. That scene is part of every fixture page and is loaded at startup.
by Threadrag
Sat Jan 30, 2016 2:13 pm
Forum: Easy Show
Topic: Running Sunlite from QLab using MTC
Replies: 1
Views: 3050

Re: Running Sunlite from QLab using MTC

Do you know the preference tab "midi setup"? You can find it at software preferences -> midi setup. Here you can see all your in-, outputs and data Sunlite recieves and sends. I haven't worked with cycles yet. So that is what I think might happen: 1)Yes, you have to put all cues in individual cycles...
by Threadrag
Thu Jan 28, 2016 7:46 pm
Forum: Sunlite Suite 2
Topic: Before or after program, light been trigger
Replies: 2
Views: 2638

Re: Before or after program, light been trigger

Do you use Stand Alone? Maybe there is a scene in the Stand Alone Editor that triggers your lights.
Did you leave the INIT scenes blank? (I'm not sure, if it affects anything when Sunlite is off. Can't test it at the moment)

Usually if you close Sunlite all lights remain in their last position.
by Threadrag
Thu Jan 28, 2016 7:25 pm
Forum: Sunlite Suite 2
Topic: Question: Color Change Buttons
Replies: 3
Views: 3388

Re: Question: Color Change Buttons

Hello Simon,

Bens showfile is not correct. Sorry Ben!

@Simon
I left you an old and a new switch in the show file. Please have a look at them to see the fault.

A tip: Use the layer settings to customize and rearrange the software's look to your needs. I gave you a small suggestion in your showfile.
by Threadrag
Thu Jan 28, 2016 6:27 pm
Forum: Sunlite Suite 2
Topic: Micro PAN/TILT judder
Replies: 6
Views: 5569

Re: Micro PAN/TILT judder

Are you sure it won't work for you? E.g. what I did: -set the time for the pan/tilt bar in EasyTime to 30 seconds. That's equal to my slowest possible movement. -now I can raise the tempo knob from 0 to 90% to get from slowest to fastest movement. 100% is even too fast for the heads. If it's not eno...
by Threadrag
Wed Jan 20, 2016 1:05 pm
Forum: Sunlite Suite 2
Topic: Micro PAN/TILT judder
Replies: 6
Views: 5569

Re: Micro PAN/TILT judder

Hello, I know that problem. First, please ignore the times in the pan/tilt editor. You can leave them at default (1sec) at any given moment. I don't think they are very useful at all. More important is the length of the pan/tilt effect in EasyTime. Expand the length of that bar to a very long time, ...
by Threadrag
Mon Jul 13, 2015 1:33 pm
Forum: Sunlite Suite 2
Topic: Feature Request Virtual Dimmer Chanel for RGB
Replies: 13
Views: 10347

Re: Feature Request Virtual Dimmer Chanel for RGB

I appreciate that feature, too. For my COB LED BARs is it impossible to create any chasers for each pixel, e.g. no random strobe or meteor effects.
by Threadrag
Thu Apr 23, 2015 8:32 pm
Forum: Sunlite Suite 2
Topic: midicon wheel pan/tilt midi config
Replies: 2
Views: 3266

Re: midicon wheel pan/tilt midi config

I've a solution for you! But it's necessary that no scene or switch has a dimmer and a pan/tilt value at the same time. So seperate pan/tilt movements from your dimmer switches. 1. Go to moving head's page settings -> fixture patch -> activate dimmer for pan/tilt channels 2. Create a switch called "...
by Threadrag
Tue Apr 14, 2015 10:33 am
Forum: Sunlite Suite 2
Topic: Midicon doesn't switch playback page
Replies: 3
Views: 4266

Midicon doesn't switch playback page

Hello, as I sad: Since I'm using more pages on the Midicon, I got trouble switching them. For the first start of Sunlite everything is fine, but if I change the left sided playback page several times, it will hang up. The console window still shows the different pages, but the Midicommand stays at o...
by Threadrag
Sat Sep 20, 2014 9:34 am
Forum: Sunlite Suite 2
Topic: No fluent movement of scanner
Replies: 2
Views: 4511

Re: No fluent movement of scanner

It could be something else. If you set up the scene by EasyTime using the Pan/Tilt effect, try to slow it down. Use a smaller circle or set higher intervall times. In EasyStep try the same fewer movements and more time. And check the scene's tempo knob In my experience, the tempo fader has not much ...
by Threadrag
Sun Jul 06, 2014 4:18 pm
Forum: Sunlite Suite 2
Topic: Suggestion: page options, EasyTime effects, backup, dimcurve
Replies: 1
Views: 2969

Suggestion: page options, EasyTime effects, backup, dimcurve

page options: To update a fixture you have to open the fixture window and select all fixtures to update. I searched a lot for this. Is it not possible to move it to the page options under patch tab? Is it possible that the software remembers all Speed, Size, Dimmer and Phasing knobs assinged to thei...
by Threadrag
Sun Jul 06, 2014 4:01 pm
Forum: Easy View 2006
Topic: Suggestion: Movinghead delay, proper wheel rotation
Replies: 1
Views: 3789

Suggestion: Movinghead delay, proper wheel rotation

To get the Visualization more realistic: Movingheads with start/stop delay, because MHs do not have the same position as DMX value says. It would make it much easier to programm. e.g. if the total time for a turn is 3 seconds, the head would never get the half of the way and back in same time, becau...